Fugoo FSNA1 - Charging and Battery Status; Checking Battery Level; Charging the Speaker

User Manual Fugoo Bluetooth Speaker model FSNA1 page 5 9/18/2015
Charging and battery charge status
Checking the battery level
• With the speaker powered on, click the (Power) button momentarily . The LED
indicator blinks green one to six times to indicate the charge of the battery, unless
battery is being charged.
• If voice prompts are enabled, the speaker responds with "Battery is almost full." or
another indication of the state of the battery’s charge, or “Battery is charging.”
• If the battery charge gets very low, the LED indicator will blink red, and after several
minutes, the speaker will say “Please recharge the battery. Powering off.”, and the
speaker will power off.
LED indicator
Voice prompt
six green blinks
Battery is full.
five green blinks
Battery is almost full.
four green blinks
Battery is three quarters.
three green blinks
Battery is half.
two green blinks
Battery is one quarter.
one green blink
Battery is low.
Charging your speaker
• Connect the Micro-USB charging cable to the speaker and to the supplied AC adapter.
• Plug the AC adapter into a power outlet.
• While the battery is being charged, the LED will slowly pulse on/off green.
• When the battery has reached full charge, the LED will glow solid green.
• CAUTION: Never use your Fugoo Bluetooth Speaker without one of its jackets
(Style, Sport, or Tough). The jacket is an essential part of your speaker because it
protects the speaker drivers from damage.