5 - 30
20 20
-
-
TK26 SK32 35 15 35 15 5 -
50
30
20 20
-
25/35 10/35 50
50/30 50/30
10. Additional Information Related to UL and CSA Standards
10.1 Short circuit protective devices (SCPD)
[Note 1]
Suitable for use on a circuit capable of delivering not more
than ___kA rms symmetrical amperes, ___V max. See the
table for values.
[Note 2] WARNING:
The opening of the branch-circuit protective device may
be an indication that a fault has been interrupted. To
reduce the risk of fire or electric shock, current-carrying
parts and other components of the controller should be
examined and replaced if damaged. If burnout of the
current element of an overload relay occurs, the complete
overload relay must be replaced.
[Note 3]
The breaker or the fuse that has the rating described in
the table might not be able to be used at near the
maximum level of the permissible current for the
corresponding starter or contactor.