How to switch Fuji Electric V9080iCD Control Panel from RUN to Local mode?
If you can't switch your Fuji Electric Control Panel from RUN mode to Local mode by pressing the [Local] switch on the system menu, it may be because the changeover time is specified in the screen program. Hold down the [Local] switch on the system menu for the specified changeover time (up to 30 seconds).
Why is the [Local] switch missing from the system menu on my Fuji Electric V9080iCD?
If the [Local] switch is not displayed on the system menu in RUN mode on your Fuji Electric Control Panel (Standard/Lite models), it is likely because [Mode Switch Prohibited] is selected. To enable the [Local] switch, hold down the [F1] switch with the [F7] switch for the time specified for [Change-over Time] (max. 30 seconds), which is set in the screen program.
How to display the status bar in RUN mode on Fuji Electric V9080iCD Control Panel?
If the status bar cannot be displayed in RUN mode on your Fuji Electric Control Panel, it is because [Status Bar Prohibited] is selected. Deselect [Status Bar Prohibited] in the [System Setting] ? [Unit Setting] ? [System/Mode Switch] tab window in V-SFT version 6.
General| Power Supply | 24 VDC |
|---|---|
| Communication Interface | Ethernet, RS-232, RS-485 |
| Operating Temperature | 0°C to 50°C |
| Protection Rating | IP65 |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
Details the initial setup and wiring procedures for the V9 series unit.
Explains the five methods for transferring screen programs to the V9 series unit.
Details the operation of system and function switches for Standard/Lite models.
Explains how to access and use the system menu, including display methods.
Describes how to display and use the status bar, including various status icons.
Explains the procedures for switching the V9 series unit from RUN mode to Local mode.
Details the information and functions available on the Local mode screen.
Provides a hierarchical overview of the screens and settings available in Local mode.
Explains how to switch to RUN mode from the Local mode menu icons.
Describes how to view system information, including MONITOUCH, screen data, and driver info.
Explains how to change the interface language and USB keyboard type for Local mode.
Details how to configure IP addresses and network settings for the V9 series unit.
Explains how to configure wireless LAN settings, including operation mode and security.
Details IP address settings for the CUR-03 communication I/F unit.
Describes the procedure for connecting the V9 series unit to a VPN.
Explains how to configure settings for using cloud data services.
Details connection and destination settings for sending e-mail notifications.
Explains how to format the SRAM area in the V9 series unit.
Details how to view and configure communication parameters for connected devices.
Shows simulator information and how to select simulator usage.
Explains how to change settings for the buzzer and backlight.
Describes how to correct the date and time of the V9 series unit's built-in clock.
Explains data transfer between the V9 unit and storage devices like SD cards.
Details how to check touch switch and function switch operations and device connections.
Explains how to perform a connection test from the V9 unit to a specified IP address.
Describes how to check for duplicate IP addresses on the network.
Explains how to register and view users for password-protected functions.
Details the types of error messages displayed on the V9 series unit.
Provides guidance on identifying and resolving common issues and symptoms.
To Next Page