Error Code
547
Problem Solving
15
021-580
[Cause] Connection failure was detected in the 3G connection of 3Gnet-
BOX.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
021-581
[Cause] Failure of the name resolution of Remote Download server in
the 3G connection of 3Gnet-BOX.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
021-582
[Cause] A conflict is detected between the software update and a batch
data setting or acquisition.
[Remedy] Close the [Maintenance] screen, wait until the batch data
setting or acquisition is completed, and operate the software
update again. If the same message is displayed again, contact
our Customer Support Center.
021-700
[Cause] The USB cable is unplugged or the USB interface may be out of
order.
[Remedy] Confirm that the USB cable is connected and switch off the
machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the error still is not
resolved, contact our Customer Support Center.
021-701
[Cause] The USB interface error occurred.
[Remedy] Retry after waiting for a while or confirm that the USB cable is
connected and switch off the machine power, make sure that
the touch screen is blank, and then switch on the machine
power. If the error still is not resolved, contact our Customer
Support Center.
021-732
[Cause] The EP system is not available.
[Remedy] Contact our Customer Support Center.
023-500
[Cause] An error occurred in the machine.
[Remedy] Contact our Customer Support Center.
Error Code
Cause and Remedy
To Next Page
Loading...
