EasyManua.ls Logo

Fuji Xerox ApeosPort-V 3060

Fuji Xerox ApeosPort-V 3060
751 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Code
581
Problem Solving
15
077-212
[Cause] Detected the installation of a tray of a different type than
expected.
[Remedy] Contact our Customer Support Center.
077-214
077-215
[Cause] Detected the installation of a tray of a different type than
expected.
[Remedy] Contact our Customer Support Center.
077-314
077-316
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
081-799
[Cause] [Fax Transfer from Address Book] is set to [On], but the fax
numebr of the forwarding destination is not registered in the
Address Book.
[Remedy] Register the fax number of the forwarding destination in the
Address Book, or set [Fax Transfer from Address Book] to [Off].
091-316
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
091-328
[Cause] An error occurred in the drum cartridge.
[Remedy] Reinstall the drum cartridge or replace the drum cartridge with a
new one. If the error still is not resolved, contact our Customer
Support Center.
091-329
091-330
091-331
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
092-315
092-329
092-330
092-331
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
092-332
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
093-335
[Cause] An error occurred in the toner cartridge.
[Remedy] Reinstall the toner cartridge or replace the toner cartridge with
a new one. If the error still is not resolved, contact our Customer
Support Center.
Error Code
Cause and Remedy

Table of Contents

Other manuals for Fuji Xerox ApeosPort-V 3060

Related product manuals