15 Problem Solving
616
Problem Solving
15
4 Gently pull the paper to remove.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
5 Return the handle [3a] to its original position.
6 Close the finisher front door.
Note • If the finisher front door is not completely closed, a message will appear and the machine remains
paused.
Paper Jams at the Handle [3c]
1
If you can see the edge of the jammed paper
on the output tray, gently pull the paper
straight from the exit area to remove.
2 Open the finisher front cover.
3 Move the handle [3c] to the left.
To Next Page
Loading...
