Machine Status
140
Machine Status
4
Auditron Reports
You can print an auditron report by each user. Note that the content on the screen differs
depending on whether the Auditron mode for services is enabled or not.
z
[Auditron Reports] appears when the [Tools] button is displayed on the Services Home screen.
z
You cannot output the report to a file. To output a report to a file, use ApeosWare Accounting Service (sold
separately).
îš„ When [Accounting Type] is set to other than [Local Accounting]
When [Accounting Type] of each service is set to other than [Local Accounting], the
following screen appears, allowing you to print a Meter Report (Print Jobs).
1
Select [Auditron Reports].
z
To display the [Auditron Reports] screen, select the <Machine Status> button, and then select [Machine
Information] > [Print Reports] > [Auditron Reports].
2
Select [Meter Report (Print Jobs)].
3
Press the <Start> button.
îš‹
Meter Report (Print Jobs)
You can check the total number of printed pages and sheets of paper used for each client
(job owner). [Meter Report (Print Jobs)] counts pages from the time at which the data is
initialized.
îš„ When [Accounting Type] is set to [Local Accounting]
When [Accounting Type] is set to [Local Accounting], the [Auditron Reports] screen
appears. You can print the auditron report per user for the services of which the Auditron
mode is set to [Enable Accounting].
z
For information on enabling the Auditron feature for each service, refer to "Accounting" (P.163).
1
Select [Auditron Reports].
z
To display the [Auditron Reports] screen, select the <Machine Status> button, and then select [Machine
Information] > [Print Reports] > [Auditron Reports].
To Next Page
Loading...
Need help?
General
