Paper and Other Media
62
Paper and Other Media
2
1
Open Tray 5 (Bypass).
z
If necessary, pull out the extension tray. The extension tray can be extended in two stages. Pull out the
extension tray gently.
2
Load paper with the side to be copied or printed on facing down, inserting the paper until
its edge lightly touches against the paper feed entrance.
z
Do not load mixed paper types into the tray.
z
Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction.
z
Depending on the type of the heavyweight paper, paper may not be fed to the machine or image quality
may deteriorate.
z
When using punched paper, load the punched paper as shown in the illustration on the right.
To Next Page
Loading...
