Customizing the Control Panel
37
Before Using the Machine
1
Services Home
You can select service buttons, which are displayed on the Services Home screen.
If you select [(Not Assigned)], the position of the selected button becomes blank.
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
z
The default user ID is "11111".
z
The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
z
When the Services Home screen is not displayed on the touch screen, press the <Services Home> button.
4
Select [System Settings] > [Common Service Settings] > [Screen/Button Settings].
5
Select [Services Home], and then select [Change Settings].
z
Select [ ] to display the previous screen or [ ] to display the next screen.
To Next Page
Loading...
