Fuji Xerox ApeosPort-VI C6671

Problem Solving
560
Problem Solving
15
016-598
016-599
[Cause] The size of an e-mail page exceeds the maximum message size
because of page splitting.
[Remedy] Take one of the following measures:
z
Reduce the file size for [Quality/File Size].
z
Increase the value for [Maximum Split Count].
Reference
z
For more information on [Quality/File Size], refer to "5 Scan" > "E-mail Options/Filing Options" >
"Quality/File Size (Specifying an Image Compression Ratio When Scanning)" in the User Guide.
z
For more information on [Maximum Split Count], refer to ? "E-mail Control"
(P.297).
016-700
[Cause] The job was suspended because the number of the digits for the
Secure Print or Charge Print passcode set on the print driver was
less than the value specified in [Minimum Passcode Length for
Stored Job] on the machine.
[Remedy] On the print driver, set the passcode string equal to or longer
than the value specified in [Minimum Passcode Length for
Stored Job].
016-701
[Cause] Unable to process print data because of insufficient memory.
[Remedy] Stop unnecessary ports or delete unnecessary data to increase
memory.
016-702
[Cause] Unable to process print data because of insufficient print page
buffer.
[Remedy] Take one of the following measures:
z
Set [Image Quality] to [Standard].
z
Increase the print page buffer size.
z
Add memory.
Reference
z
For more information on the [Image Quality], refer to the help of the print driver. For more
information about memory, refer to "Allocate Memory" (P.265).
016-703
[Cause] The machine received an e-mail specified with an invalid folder
number.
[Remedy] For errors occurring during fax or Internet fax transmission:
Contact our Customer Support Center.For errors occurring
during e-mail/fax/Internet fax reception:Take one of the
following measures:Register the specified folder number, and
request the sender to send the e-mail/fax/Internet fax
again.Request the sender to send to an available folder.If the
error still is not resolved, contact our Customer Support Center.
016-704
[Cause] The folder is full, and hard disk capacity is insufficient.
[Remedy] Delete unnecessary files from the folder, and save the file.
Reference
z
Refer to "6 Send from Folder" > "Checking/Operating Files in a Folder" in the User Guide.
Error Code
Cause and Remedy