Error Code
563
Problem Solving
15
016-720
[Cause] An invalid command is included in PCL print data.
[Remedy] Confirm the print data and try printing again.
016-721
[Cause] An error occurred during print processing. Probable causes are
as follows:
1) Printing was instructed by the Auto Paper selection when
[Paper Type Priority] is set to [Auto Paper Off] for all paper in
[Paper Tray Settings] of [Common Service Settings].
2) ESC/P-K command error occurred.
[Remedy] For 1), when printing by the Auto Paper selection, set one of the
paper types to other than [Auto Paper Off] in [Paper Type
Priority].
For 2),confirm the print data.
z
Refer to "Paper Type Priority" (P.177).
016-722
[Cause] The specified staple position is not supported by the machine,
or the paper size specified is not supported by the finisher.
[Remedy] Confirm the staple position and the paper size, and try printing
again.
016-723
[Cause] The specified punch position is not supported by the machine,
or the paper size specified is not supported by the finisher.
[Remedy] Confirm the punch position and the paper size, and try printing
again.
016-724
[Cause] The specified staple and punch position combination is
unsupported.
[Remedy] Specify the staple and punch positions on the same side, and try
printing again.
016-725
[Cause] A scanned document stored in a folder was to be sent by fax
using the Job Flow feature, but the file in the folder could not be
converted to fax data.
[Remedy] Do not use the Job Flow feature. Simply scan the document
from the machine's [Fax] screen to send it by fax.
016-726
[Cause] Unable to automatically select a printer language because
PostScript data was sent with no Adobe PostScript 3 Kit
(optional) installed.
[Remedy] The Adobe PostScript 3 Kit (optional) must be installed.
016-727
[Cause] A print job was cancelled without storing a file into a folder
because the file was determined as not containing any pages.
[Remedy] The file could not be stored into the folder because the machine
determined the print file as not containing any pages. Disable
[Skip Blank Pages] on the [Advanced] tab on the print driver, or
add text to the file if the file is blank.
016-728
[Cause] An unsupported tag is included in the TIFF file.
[Remedy] Confirm the print data.
016-729
[Cause] Unable to print because the number of colors or the resolution
of the TIFF file exceeds the allowed range.
[Remedy] Change the number of colors or resolution for the TIFF file, and
execute the operation again.
Error Code
Cause and Remedy
To Next Page
Loading...
