Device Components
43
High Capacity Feeder C1-DS (optional)
1 Ground fault interrupter
Automatically shuts off electricity in the event of current leakage.
2 Tray 5 (Bypass)
Used for loading non-standard paper, such as thick-stock paper and other special media,
that cannot be loaded in Trays 1 to 4, 6, and 7.
3 Tray 5 (Bypass) top cover
Open this cover to clear paper jams.
4 Error lamp
If a paper jam occurs, the lamp of the jammed location lights up. If the priority device lamp
is blinking, first clear the paper jam.
5 Front door of the High Capacity Feeder
Open this door to clear paper jams. This unit conveys paper supplied from Tray 6, 7 or Tray
5 (Bypass) to the device.
6Tray 6, 7
Load paper here.
To Next Page
Loading...
