Fuji Xerox DocuCentre-IV 2060 User Manual

Calling a Stored Program
329
Stored Programming
8
Calling a Stored Program
The following describes how to call a stored program.
When you call a specified stored program, the last screen shown when you registered
the stored program appears.
1 Press the <Services Home> button.
2 Select [Stored Programming].
3 Select a number of a stored program
containing the features you want to use.
Note • You can only select registered numbers.
• Select [ ] to return to the previous
screen or [ ] to move to the next screen.
• After the stored program has been called,
the machine sounds an audible tone. If a
failure occurs, the machine sounds a fault
tone.
For information on how to change the volume of the sound that notifies that a stored program has been
called, refer to "5 Tools" > "Common Service Settings" > "Audio Tones" > "Stored Programming
Complete Tone" in the Administrator Guide.
4 After the stored program is called, select other features if necessary.
5 Press the <Start> button.
<Services Home> button
123
456
789
0#
C
<Start> button

Fuji Xerox DocuCentre-IV 2060 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Paper Capacity	250 sheets
Paper Capacity (Standard)	250 sheets
Network Connectivity	Ethernet
Display	LCD
Type	All in One Printer
Paper Size	A4, Legal, Letter
Connectivity	USB
Operating System Compatibility	Windows, Mac