Fuji Xerox DocuCentre-V 2060 User Manual

Machine Status
110
Machine Status
4
2 Select [Factory Defaults] or [Custom Settings].
Factory Defaults
You can use the factory default settings.
Custom Settings
Displays the numbers stored in memory.
3 When you select [Custom Settings], select a memory number to use.
4 Select [Save].
Password
For PDF Direct Print, if a password is set for files, set the password here in advance. PDF files
can be printed only when the passwords assigned and entered are the same.
You can use up to 32 characters for the password.
1 Press [Password].
2 Enter a password of up to 32 single-byte characters with the keyboard displayed, and select
[Save].
Fax Receiving Mode
You can set a mode for receiving faxes.
Note
z
As for IP fax (SIP), the machine always receives faxes automatically.
Reference
z
For information on auto receive and manual receive, refer to "Fax" > "Receiving Faxes" in the User Guide.
1 Press the <Machine Status> button.
2 Select [Fax Receiving Mode].

Fuji Xerox DocuCentre-V 2060 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	20 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	3 seconds per page
Maximum Paper Size	A3
Copy Speed (Black)	20 ppm
Paper Capacity	250 sheets
Supported Media Sizes	A3, A4, A5, B4, B5, Legal, Letter
Connectivity	USB, Ethernet, Wi-Fi
Operating System Compatibility	Windows, macOS, Linux