Fuji Xerox DocuCentre-V C3374 Administrator's Guide

Connectivity & Network Setup
215
Tools
5
 Adobe Communication Protocol

Standard
Select this when the output protocol of the print driver is in the ASCII format.

Binary
Select this when the output protocol of the print driver is in the BCP format.

TBCP
Select this when the output protocol of the print driver is in the TBCP format.

RAW
Select this when the output protocol of the print driver is in the ASCII or binary format.
The data is printed without being controlled by the Adobe communication protocol.
 PostScript Wait Timeout
The machine automatically terminates a connection when the machine does not receive
data for a certain period of time. When data is being printed with [RAW] is selected for
[Adobe Communication Protocol], select [Disabled] if you want to use the time period set in
[Auto Eject Time] or select [Enabled] if you want to use the timeout period of PostScript.
LPD
 Port Status
Select [Enabled] to use LPD.
 Port Number
Enter a port number for LPD from 1 to 65535.
The default value is 515.
Important • Do not use the numbers assigned to the other ports.
 Maximum Number of Sessions
Enter the maximum number of client sessions using LPD. You can enter a number from 1 to
10 in 1 session increments.
The default value is 5.
SMB Client
 Port Status
Select [Enabled] to use SMB when you use the Scan to PC (SMB) service or SMB
authentication service.
IPP
 Port Status
Select [Enabled] to use IPP.
Set this when you want to use IPP (Internet Printing Protocol) to print via the Internet.
 Added Port Number
Select [Disabled] when you want to set the machine does not accept IPP from other than
the standard port number, or select [Enabled] when accepts all port numbers.
Enter a port number for IPP other than the standard port number from 1 to 65535.
The default value is 80.

Fuji Xerox DocuCentre-V C3374 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C3374
Category	All in One Printer
Language	English