Fuji Xerox DocuCentre-V C3374 Administrator's Guide

Configuration of Scan to My Folder (ApeosPort Series Models Only)
377
Scanner Environment Settings
9
Configuration of Scan to My Folder (ApeosPort Series Models Only)
This section describes how to configure the machine to use the Scan to My Folder service.
The following shows the reference section for each procedure.
Step 1 Preparations .....................................................................................................................................................................377
Step 2 Enabling SMB Port and Setting up TCP/IP................................................................................................................377
Step 3 Configuring Remote Authentication ..........................................................................................................................378
Step 4 Configuring Scan to My Folder ....................................................................................................................................379
Step 5 Configuration on the Computer ..................................................................................................................................381
Step 1 Preparations
The Scan to My Folder service allows you to forward scanned files to recipients which vary
depending on a login user when [Login to Remote Accounts] is selected for [Login Type].
The following items are required to use the Scan to My Folder feature.
 Remote Authentication System
To use the Scan to My Folder service, a remote authentication system is required.
For more information about a remote authentication system, refer to "Authentication System" (P.231).
 Destination Computer
The following operation system must be installed on a destination computer.
For Mac OS X, a sharing user account is required on the Mac OS X.

Microsoft Windows Server 2003

Microsoft Windows Server 2008

Microsoft Windows Server 2008 R2

Microsoft Windows Server 2012

Microsoft Windows Server 2012 R2

Microsoft Windows Vista

Microsoft Windows 7

Microsoft Windows 8

Microsoft Windows 8.1

Mac OS X 10.5 Leopard

Mac OS X 10.6 Snow Leopard

Mac OS X 10.7 Lion

Mac OS X 10.8 Mountain Lion

Mac OS X 10.9 Mavericks
Step 2 Enabling SMB Port and Setting up TCP/IP
To use Scan to My Folder service, enable the SMB port and set the IP address. The following
describes the configuration procedures on the machine.

Fuji Xerox DocuCentre-V C3374 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C3374
Category	All in One Printer
Language	English