Fuji Xerox DocuCentre-V C3374 Administrator's Guide

16 Appendix
686
Appendix
16
2 Sided printing 12 Sets the 2 sided printing.
[0] (Default) : Off
[1] : Head to Head
[2] : Head to Toe
Important • When [Postcard] is selected for [Paper Size], [Head to Head] and [Head to
Toe] cannot be selected.
Font 14
(Alphanumeric
fonts)
Sets the font for single-byte characters.
[0] (Default) : Roman
[1] : Sanserif
Important • Since this feature selects the default value, its setting will not be affected
when an extended command is received.
Print control 51
(Blank sheet
output)
Sets whether to print blank pages if included in the document.
[0] (Default) : Off
[1] : On
Note • Even when [Off] is selected, blank pages are printed if they are spaces
created with user-defined characters or images in white color.
• When [Off] is selected for this feature and 2 Up or 2 sided printing is
specified, blank pages are not printed.
52
(Character
print area)
Extends the position of the right margin.
[0] (Default) : Standard
[1] : Extended
Important • Changing the character print area from [Extended] to [Standard] restores
the left and right margins to the default values.
• When the position of the right margin is set here, that position becomes
the right edge of the character print area.
53
(Image
enhancement)
Sets whether or not to enable the Image Enhancement feature.
Image Enhancement smoothens the border between black and white,
reducing rough edges, and thus seemingly increasing the resolution.
[0] : Off
[1] (Default) : On
ESCP switch 55
(Text quality)
Sets the Text Quality mode to high quality or draft.
[0] (Default) : High Quality
[1] : Draft
Important • Since the default value is selected for the [Text Quality], [Reduced
Characters], [Character Code Table], [Page Length], and [1-inch
Perforation Skip] features, their settings will not be affected when an
extended command is received.
Note • Changing settings does not change actual printing quality.
• This setting affect the Text Quality selection commands. For more
information on the Text Quality selection commands, contact our
Customer Support Center.
56
(Reduced
characters)
Reduces the size of single-byte alphanumeric characters when printing. Sets
whether to reduce their sizes or to print them at a scale of 100%.
[0] (Default) : Off
[1] : On
58
(Page length)
Sets the length of a page (printable area) to 11 inches or 12 inches.
[0] (Default) : 11 inches
[1] : 12 inches
59
(1-Inch
perforation
skip)
Sets whether or not to leave a 1-inch space between pages.
[0] (Default) : Off
[1] : On
Important • This is effective only when CSF under [Paper Position] is set to [Off].
Setting Item Item Number Value

Fuji Xerox DocuCentre-V C3374 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C3374
Category	All in One Printer
Language	English