Operations during Scanning
289
Scan
5
2 Select the job to cancel.
3 Select [Delete].
4 Select [Delete].
Note • If you cancel the job, the scanned data
stored in the folder will also be deleted.
Previewing the Scanned Images during a Scan Job
You can preview the scanned images while scanning the document.
1
When a document starts to be read with
[Preview] is checked on a Scan screen, the
screen on the right is displayed. After the
document is read, select [Preview]. A preview
screen is displayed and the first page of the
lastly read document is displayed.
Note • When [Store to Folder] or [Store to USB] is
selected, [Save (Last Original)] is displayed
instead of [Send (Last Original)].
• When this screen or the preview screen is
displayed and the time of [Auto Clear] lapsed
without any operation, you can set whether
or not to continue the job. For more
information, refer to "5 Tools" > "Common
Service Settings" > "Other Settings" > "Paused
Job Handling" in the Administrator Guide.
For more information on Auto Clear, refer to "5 Tools" > "Common Service Settings" > "Machine Clock/Timers" > "Auto Clear"
in the Administrator Guide.
To Next Page
Loading...
