Fuji Xerox DocuCentre-V C3376 User Manual

3 Copy
124
Copy
3

Source Color
Displays the [Source Color] screen on which you can select one or more colors from your
document to define them as source colors.
Refer to "[Source Color] Screen" (P.124).

Target Area Color
Displays the [Target Area Color] screen on which you can select the target color to be used
in place of the selected source colors.
Refer to "[Target Area Color] Screen" (P.125).

Non-target Area Color
Displays the [Non-target Area Color] screen on which you can select the color to be used
in place of the colors other than the selected source colors.
Refer to "[Non-target Area Color] Screen" (P.125).
 Single Color
Copies in one specified color regardless of the color of the document.
Selecting this option displays [Color] on the screen. Select a color on the [Output Color -
Color] screen which is displayed after selecting [Color].
Refer to "[Output Color - Color] Screen" (P.126).
[Source Color] Screen
This screen allows you to select one or more colors from your document to define them as
source colors.
1 Select [Dual Color].
2 Select [Source Color].
3 Select [Other than Black] or [Color].
 Other than Black
The colors other than black will be the source
colors.
 Color
Allows you to select one or more source colors
from six preset options.

Fuji Xerox DocuCentre-V C3376 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C3376
Category	All in One Printer
Language	English