Fuji Xerox DocuCentre-V C4476 User Manual

4 Fax
268
Fax
4
3 Select [Manual Send] from the drop-down
menu.
4 Use the keyboard displayed on the touch screen to enter numbers in the following format.
Note • You can specify up to 20 locations for relay recipients.
F Code Method
You can perform Relay Broadcast by registering the relay station’s F code and password (if
necessary) to the machine.
Note • When performing Relay Broadcast with the F Code method, you can use a password if you set a
receive password for the relay station.
• When performing Relay Broadcast between Fuji Xerox manufactured machines that can be used as
both an initiating station and a relay station, we recommend that you use the fax signal method.
• Confirm the F code (sub-address) and password of the target relay station.
1 Select the [Fax/Internet Fax Options] tab to display the [Fax/Internet Fax Options] screen.
2 Select [F Code].
3 Select [On].
4 Select the [F Code] box, and enter the F code with the numeric keypad.
Note • You can enter up to 20 digits for the F Code.

Relay Broadcast
The number of digits of the relay station ID:
Relay station
telephone
number
Facsimile tone
Password
Beep!
Beep!
Relay
station
ID
Address
number
Relay Broadcast Print
Directive
Relay
Station ID
Address
Number
Address
Number
Address
Number
....
Up to 20 digits

Fuji Xerox DocuCentre-V C4476 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C4476
Category	All in One Printer
Language	English