Fuji Xerox DocuCentre-V C7775

11 Job Status
418
Job Status
11
2 Enter the user ID, and select [Enter].
Note • When the passcode is set, enter the user ID
and select [Next]. Then, enter the passcode
and select [Enter].
• While the user is authenticated, the <Log In/
Out> button lights up on the control panel.
• To log out of the machine, press the <Log In/
Out> button on the control panel.
3 Select [Private Charge Print].
Note • If you are authenticated as a system administrator, selecting [Private Charge Print] will display a list
of authentication user IDs. Select a user ID from the list, and then select [Job List] to display a list of
jobs stored for the selected user.
4 Select the job to be printed or deleted.
Note • You can select up to 100 files simultaneously
to print or delete the files. If you select
multiple files, they are printed in the selected
order.
• The files in a folder can be displayed in a list
or thumbnailed view. You can also preview
the files.
5 Select any option.
6 When printing, specify the number of print sets using the numeric keypad.
 Select All
Selects all jobs. To deselect all the jobs, select this button again.
 Delete
Deletes the Private Charge Print job.
Note • If jobs with the same user ID are all deleted, the user ID will be deleted.
Refer to "When [Delete] is Selected" (P.418).
 Preview
Displays the previewed image on the first page of the selected job.
Note • If you select multiple documents, the [preview] button cannot be pressed.
Refer to "When [Preview] is Selected" (P.419).
 Print Quantity
Specify the number of print sets using the numeric keypad.
 Print
Prints the Private Charge Print job. After printing, the job is deleted.
Refer to "When [Print] is Selected" (P.419).
When [Delete] is Selected
1 Select [Delete].
 Delete
Deletes the job.
Important • Once the job is deleted, it cannot be restored.