EasyManua.ls Logo

Fuji Xerox DocuCentre-VI C4471

Fuji Xerox DocuCentre-VI C4471
889 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
760
Appendix
16
7
Select the tray in which you loaded paper in step 1, and then select [Print].
Coverage 1, 2
Two patterns of density for each color (Yellow, Magenta, Cyan, and Black) could be set for
the sample output.
Full Color / Single Color
Select [Full Color] to check the density and balance of all colors. Select [Single Color] to
check the density of a specific color.
If you selected [Single Color], select the color to print from [Yellow], [Magenta], [Cyan], and
[Black].
Paper Supply
Select the tray with the paper to adjust density.
8
Select [Confirm].
9
Check the sample output. If the color density is uneven, make an adjustment.
1) Select the color to adjust from [Yellow], [Magenta], [Cyan], and [Black].
2) Set the shape, level, and inboard / outboard, according to the sample output.
Shape
According to the sample output, select how the adjustment amount of the density pattern
is from 1 to 6.
Reference
z
For details on shapes, refer to "Shape Patterns" (P.761).
Level
According to the sample output, select the difference level of density from 1 to 6. Level
shows there is no adjustment amount between the areas of the sample output. Greater
level shows greater difference.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-VI C4471

Related product manuals