PCL Emulation
811
Appendix
16
Binding 217 Sets binding when printing 2 sided.
You can select [LEF] or [SEF] for 2 sided printing. Select according to the edge to
be bound. Unifies the leading direction of the image on the front and rear sides
of the paper at the long edge of the paper for LEF and at the short edge of the
paper for SEF.
[0] (Default): LEF
[1]: SEF
Line termination 218 Sets line termination processing.
[0] (Default): Off
[1]: Add-LF (Appends an LF to CR)
[2]: Add-CR (Appends a CR to LF and FF)
[3]: CR-XX (Appends a CR to LF and FF, and LF to CR)
Default custom
paper size
219 (Short
edge)
Specifies the default custom paper size.
[2100] (Default short-edge value) : 210.0 mm
[2970] (Default long-edge value) : 297.0 mm
[0] - [9999]: 0 to 999.9 mm
220 (Long
edge)
Print Quantity
Setup
221 Sets the method for specifying the number of copies to print.
[0]: Protocol
[1]: Panel
[2](Default): Command
Parameter Item No. Value
To Next Page
Loading...
