Maintenance
84
Maintenance
3
4
Insert the new waste toner container while holding its handle, and push the container in
until it clicks.
5
Insert the used waste toner container into the supplied plastic bag and then seal it firmly
with the zipper.
6
Carefully place the old waste toner container into the empty box with both hands.
z
If you have a used waste toner container no longer needed, contact your local Fuji Xerox representative for its
disposal.
7
Clean the LED printheads.
z
For information on how to clean the LED printheads, refer to "Cleaning the Interior (LED Printheads)" (P.107).
8
Close the front cover.
z
If the front cover is not closed completely, a message appears and the machine will remain paused.
To Next Page
Loading...
