6 Troubleshooting
126
Troubleshooting
6
3
Remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
4
Return the handle [3d] to its original position.
5
Close the finisher front door.
Note • If the finisher front door is not completely closed, a message will appear and the machine remains
paused.
Paper Jams at the Handle [3d] (when the paper is ejected at the output area)
1
Gently pull the jammed paper to the right to
remove.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
Paper Jams in the Booklet Unit [4] (For C3 Finisher with Booklet Maker)
1
Open the finisher front door.
2
Pull out the booklet unit [4].
To Next Page
Loading...
