• If your authentication method is Open System and your encryption mode is None, go to the next step.
9. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Fuji Xerox installation disc into your computer or go to the download page for
your model on the Fuji Xerox website at
http://www.fujixeroxprinters.com/.
Related Information
• Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network
• How to Enter Text on Your Fuji Xerox Machine
• Wireless LAN Report Error Codes
71
To Next Page
Loading...
