172
Specify the IP address using CIDR notation.
For example: 192.0.2.1/24
Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.0.2.1, the
addresses 192.0.2.xxx are valid.
10.
Select a Remote IP Address option to specify the IP address conditions for the recipient:
•Any
If you select Any, all IP addresses are enabled.
• IP Address
Type the specified IP address (IPv4 or IPv6) in the text box.
• IP Address Range
Type the starting and ending IP addresses for the IP address range. If the starting and ending IP addresses
are not standardized to IPv4 or IPv6, or the ending IP address is smaller than the starting address, an error
will occur.
• IP Address / Prefix
Specify the IP address using CIDR notation.
For example: 192.0.2.1/24
Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.0.2.1, the
addresses 192.0.2.xxx are valid.
11.
Click Submit.
When you change the settings for the template currently in use, restart your machine to active the
configuration.
• Manage Your Network Machine Securely Using IPsec
To Next Page
Loading...
Need help?
General
