35
Home > Paper Handling > Paper Settings > Change the Check Paper Size Setting
Change the Check Paper Size Setting
When you turn on your machine's Check Size setting, the machine displays a message when you remove a paper
tray or load paper using the MP tray, asking if you changed the paper size and paper type.
The default setting is On.
1.
Press
▲
or
▼
to select the [Paper Tray] option, and then press OK.
2.
Press
▲
or
▼
to select the [Check Size] option, and then press OK.
3.
Press
▲
or
▼
to select the [On] or [Off] option, and then press Go.
• Paper Settings
To Next Page
Loading...
