231
Toner specks
• Make sure the media type setting in the driver
matches the type of paper you are using.
• Clean the drum cartridge.
• The toner cartridge may be damaged.
Replace the toner cartridge with a new toner cartridge.
• The drum cartridge may be damaged.
Replace the drum cartridge with a new drum cartridge.
• The fusing unit may be contaminated.
Contact Fuji Xerox customer service.
Hollow print
• Select Thick Paper mode in the printer driver or use
thinner paper than you are currently using.
• Select the appropriate media type in the menu setting.
• Check the machine’s environment. Conditions such as
high humidity can cause hollow print.
• The drum cartridge may be damaged.
Replace the drum cartridge with a new drum cartridge.
All black
• Clean the corona wire inside the drum cartridge.
• The drum cartridge may be damaged.
Replace the drum cartridge with a new drum cartridge.
White lines across the page
• Select the appropriate media type in the printer driver.
• Select the appropriate media type in the menu setting.
• The problem may disappear by itself. Print multiple
blank pages to clear this problem, especially if the
machine has not been used for a long time.
• Clean the drum cartridge.
• The drum cartridge may be damaged.
Replace the drum cartridge with a new drum cartridge.
Lines across the page
• Clean the drum cartridge.
• The drum cartridge may be damaged.
Replace the drum cartridge with a new drum cartridge.
White lines, bands or ribbing across the page
• Check the machine's environment. Conditions such as
high humidity and high temperatures may cause this
print quality problem.
• Clean the drum cartridge.
• If the problem is not solved after printing a few pages,
replace the drum cartridge with a new drum cartridge.
Examples of poor print quality Recommendation
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
To Next Page
Loading...
Need help?
General
