Need help?Do you have a question about the FujiFilm CR-IR346CL and is the answer not in the manual?
Lists precautions required to use the CR-IR346CL safely.
Explains how to start up and shut down the CR-IR346CL unit.
Process of entering patient demographic and clinical information.
Step-by-step guide for reading images from the IP after exposure.
Understanding and responding to error messages displayed by the system.
Procedures for recovering from system freezes or unresponsive states.
Lists precautions required to use the CR-IR346CL safely.
Explains how to start up and shut down the CR-IR346CL unit.
Process of entering patient demographic and clinical information.
Step-by-step guide for reading images from the IP after exposure.
Understanding and responding to error messages displayed by the system.
Procedures for recovering from system freezes or unresponsive states.
General| Spatial Resolution | 10 lp/mm |
|---|---|
| Imaging Plate Size | Up to 35 x 43 cm (14" x 17") |
| Pixel Size | 50 μm |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Interface | Ethernet |
| Operating Environment - Humidity | 30% to 75% (non-condensing) |
To Next Page
