Need help?Do you have a question about the FujiFilm EF-X500 and is the answer not in the manual?
General| Type | Compact flash |
|---|---|
| Compatibility | GFX100 / GFX 50S / GFX 50R / X-H1 / X-Pro3 / X-Pro2 / X-T4 / X-T3 / X-T2 / X-T1 / X-T30 / X-T20 / X-E3 / X100F / X-T200 / X100V |
| Product color | Black |
| Water-resistant | Yes |
| Color temperature | 5600 K |
| Approx. number of flashes | 50 |
| Approximate recycling time | - s |
| Camera brands compatibility | Fujifilm |
Weight and Dimensions| Depth | 123.9 mm |
|---|---|
| Width | 67.5 mm |
| Height | 106 mm |
Step-by-step guide on how to install batteries into the flash unit.
Overview of flash control modes like TTL, Manual, and Repeating.
How to manually adjust flash output (+/- EV) in TTL mode for exposure control.
How to set up the flash for stroboscopic shooting with multiple flashes.
How the EF-X500 acts as a master flash to control remote units via optical pulses.
Steps to configure a flash unit for use as a remote flash in the system.
How to configure the flash unit to act as a master flash in the wireless system.
Steps to take pictures after configuring master and remote units in TTL mode.
Using TTL mode for automatic exposure control with wireless flash setups.
Manually adjusting flash output for one or more groups in wireless mode.
Using repeating flash mode with one or more groups in wireless photography.
Setting the flash to full manual remote slave modes (P or N).
How to access and navigate the flash unit's setup menu.
Steps to save current flash settings to a slot for later recall.
Steps to load previously saved flash settings from a slot.
How to reset flash settings to their original factory default values.
Common problems and their solutions when using the flash unit.
To Next Page
