FujiFilm X-T20 User Manual

270
Peripherals and Optional Accessories
10
External Flash Units
Setting
Setting
Description
Description
K
Master
Assign the master fl ash to group A (Gr A), B (Gr B), or
C (Gr C). If OFF is selected, output from the master
fl ash will be held to a level that does not aff ect the
fi nal picture. Available only if the unit is mount-
ed on the camera hot shoe as a master fl ash for
FUJIFILM optical wireless remote fl ash control in
TTL, TTL%, or M mode.
K
Number of
 ashes
Choose the number of times the fl ash fi res each
time the shutter is released in MULTI mode.
L
Channel
Choose the channel used by the master fl ash
for communication with the remote fl ash units.
Separate channels can be used for diff erent fl ash
systems or to prevent interference when multiple
systems are operating in close proximity.
L
Frequency
Choose the frequency at which the fl ash fi res in
MULTI mode.

FujiFilm X-T20 Specifications

General

Megapixels	24.3 MP
ISO Range	200-12800 (expandable to 100-51200)
Continuous Shooting Speed	8 fps
Weight	383 g (including battery and memory card)
Image Processor	X-Processor Pro
Wireless Connectivity	Wi-Fi
Battery	NP-W126S Li-ion battery
Dimensions	118.4 x 82.8 x 41.4 mm
Sensor	APS-C X-Trans CMOS III
Autofocus Points	91 points
Screen	3.0-inch tilting LCD (1.04M dots)
Viewfinder	0.39-inch OLED (2.36M dots)
Video Resolution	4K at 30 fps, Full HD at 60 fps
Battery Life	Approx. 350 shots
Shutter Speed	1/4000 sec to 30 sec