Need help?Do you have a question about the Fujikura FSM-30R and is the answer not in the manual?
General| Applicable Fibers | SM, MM, DS, NZDS |
|---|---|
| Display | LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | -10°C to 50°C |
| Return Loss | ≥ 60 dB |
Essential preparations required before commencing the splicing process.
How to connect and use the AC adapter or battery pack for power.
Steps to select appropriate splice and heater modes for operation.
Procedures for preparing optical fibers before splicing.
Detailed steps for cleaving optical fibers correctly.
How to correctly set the prepared fibers onto the splicer.
The core process of performing the arc fusion splice operation.
Performing the arc test to optimize arc power for low splice loss.
Steps to select appropriate splice and heater modes for operation.
How to modify splice parameters for specific applications.
How to adjust heater parameters for different sleeve types.
Advanced settings for customizing splicer functions and security.
Procedure for replacing worn discharge electrodes.
Lists common error messages, their reasons, and remedies.
Provides solutions for common operational issues not covered by error messages.
To Next Page