To Next PageTo Next PageWhy is my Fujitsu ABYG18KRTA Air Conditioner indoor unit showing no power?
If your Fujitsu Air Conditioner indoor unit has no power, the possible causes include a power supply failure, an external cause such as voltage drop or noise, or defective electrical components. To address this, check the installation condition, investigate for any external causes at both the indoor and outdoor units, and inspect the electrical components.
What to do if my Fujitsu ABYG18KRTA Air Conditioner indoor unit has no power?
If your Fujitsu Air Conditioner indoor unit isn't powering on, the issue might stem from a power supply failure, an external factor affecting voltage, or faulty electrical components. You should check the installation, look for external causes affecting the indoor and outdoor units, and examine the electrical components.
How to troubleshoot a Fujitsu Air Conditioner indoor unit with no power?
To troubleshoot a Fujitsu Air Conditioner indoor unit that isn't receiving power, consider these potential causes: a failure in the power supply, external disturbances such as voltage drops or electrical noise, or defects in the electrical components themselves. Start by checking the installation condition. Then, check for any external causes affecting the indoor and outdoor units, and inspect the electrical components.
General| Cooling Capacity | 5.2 kW |
|---|---|
| Heating Capacity | 6.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Outdoor Unit Noise Level | 50 dB(A) |
| Outdoor Unit Weight | 40 kg |
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
