To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu AJ*126LBTF and is the answer not in the manual?
General| Brand | Fujitsu |
|---|---|
| Model | AJ*126LBTF |
| Category | Air Conditioner |
| Language | English |
Explains procedures marked with WARNING for death or serious injury.
Covers using correct parts, tools, and electrical safety for installation.
Details areas to avoid for installation and environmental considerations.
Discusses higher pressure, special tools, and handling procedures for R410A.
Lists essential tools for working with R410A refrigerant.
Lists components included with the unit for installation.
Guidelines for choosing an appropriate installation site and preparing the area.
Procedures for safely moving the outdoor unit using ropes or forklifts.
Specifies clearances and dimensions for unit installations.
Instructions on mounting the unit and planning piping configurations for multiple units.
Covers pipe sizing, materials, brazing, flare connections, and routing for optimal performance.
Details connecting multiple outdoor units, insulation, and drain processing.
Methods for handling condensate drainage and insulating refrigerant pipes.
Safety rules, power supply requirements, and grounding for electrical wiring.
Tables providing guidance on wire sizing, breaker capacity, and transmission cables.
Diagrams and steps for connecting power and transmission cables to units.
Introduces field setting and covers DIP and rotary switch functions for unit configuration.
Explains how to set refrigerant circuit addresses using rotary switches.
Guidelines for installing the termination resistor on the transmission line.
Covers sealing tests, vacuum process, and adding refrigerant.
Formula and example for calculating the required additional refrigerant charge.
Procedures and criteria for verifying unit operation after installation.
Explains LED patterns for normal operation and various system error conditions.
Steps for recovering refrigerant from the unit before moving or discarding it.
Lists optional kits like separation tubes and headers for connecting multiple units.
Explains the meaning of various items found on the unit's label.
