Fujitsu AOG30KATA Series User Manual

NOTES:
• Strainer normally does not have temperature difference between inlet and outlet as shown be-
low.
Pipe (In) Pipe (Out)
• If there is a difference like shown below, there is a possibility of inside clogged. In this case, re-
place the strainer.
Pipe (In) Pipe (Out)
3-4. No cooling/No heating - (03-49) - 3. Troubleshooting without error code
TROUBLESHOOTING TROUBLESHOOTING

Fujitsu AOG30KATA Series Specifications

General

Brand	Fujitsu
Model	AOG30KATA Series
Category	Air Conditioner
Language	English