SERVICE PARTS INFORMATION 2
Check Point 1 : Check Connection
Check Point 2 : Check Winding Resistance
Check Point 3 : Replace Main PCB
C
S
R
Compressor
Check terminal connection of Compressor
(loose or incorrect wiring)
Check winding resistance of each terminal
If the resistance value is 0 or infinite, replace Compressor.
If the symptom does not change with above Check 1, 2, replace Main PCB.
R
S
(WHITE)
C
(BLACK)
Terminal cover opened
(RED)
AOU18/24RLB
Resistance Value :
0.7 at 77°F(25°C)
AOU18/24RLB
02-34
To Next Page
Loading...
