- 114 -
MULTI TYPE
2-3 rooms type
6. Press the MODE button once to transmit the function mode information.
7. Press the button once to transmit the function setting information. 2 short beeps will be
emitted from the indoor unit when the signal is received correctly. If wrong code is set, no beep
sound will be emitted.
NOTE: Press button within 30 seconds after pressing MODE button.
For the function details, refer to Chapter 13-5. "Function details" on page 125.
8. Exit the function setting mode by pressing the RESET button.
/
Pi Pi
/
To Next Page
Loading...
