Fujitsu AOUH18LUAS1 User Manual

7-10. Prevention to restart for 3 minutes (3 minutes st)
→hen the compressor fails to start for the number of times below, it does not enter operation status
for 3 minutes.
• Model: AOUH18LUAS1
Retry number 50
Retry set number 3
• Models: AOUH24LUAS1, AOUH30LUAS1, and AOUH36LUAS1
Retry number 10
Retry set number 3
→hen the compressor fails to start in the retry set number above, the compressor is stopped.
7-11. 4-way valve control
• If heating mode is selected at the compressor start, 4-way valve is energized for heating.
• →hen the air conditioner is switched between cooling and heating mode, compressor is stopped,
and the 4-way valve is switched when the following time passes and the compressor is started.
18 model 140 seconds
24/30/36 model 3 minutes
7-12. Human sensor for energy saving
If no one enters the room for the set time, the set temperature is automatically controlled. (→hen
someone comes back into the room, the human sensor detect this, and automatically revert to the
original settings.)
Operation mode
Operation details
(If there is no one in the room for a while)
Cooling/Dry
The setting temperature is increased by maximum 3.6°F (2°C).
(Maximum setting temperature: 86°F [30°C])
Heating
The setting temperature is decreased by maximum 3.6°F (2°C).
(Minimum setting temperature: 60.8°F [16°C])
Auto
Energy saving function is performed automatically for the selected mode
(cooling/heating/dry).
• Application range:
10.5ft (3.2m)
2.6ft (0.8m)
28.9ft (8.8m)
• Details about detection with the human sensor:
The human sensor detects whether there are people in the room by looking for movement by peo-
ple in the room.
7-10. Prevention to restart for 3 minutes (3 minutes st) - (04-34) - 7. Various control
CONTROL AND FUNCTIONS CONTROL AND FUNCTIONS

Fujitsu AOUH18LUAS1 Specifications

General

Brand	Fujitsu
Model	AOUH18LUAS1
Category	Air Conditioner
Language	English