En-9
SLEEP TIMER OPERATION
→ 1.0 → 2.0 → 3.0 → 5.0 → 7.0 → 9.0(hour)
(RESET)
→ 1.0 → 2.0 → 3.0 → 5.0 → 7.0 → 9.0(hour)
(RESET)
To Cancel the Timer:
Press the CANCEL (TIMER) button.
To Stop the Air Conditioner During
Timer Operation:
Press the START/STOP button.
To Use the SLEEP timer
While the air conditioner is operating or stopped, press the
SLEEP button (Fig. 5 ]).
Each time the button is presssd, the time changes in the following order:
The Indoor Unit’s OPERATION Indicator Lamp (red) (Fig. 2 5) and the TIMER Indica-
tor Lamp (green) (Fig. 2 6) light.
To Change the Timer Settings
Press the SLEEP button once to display the last setting time.
Press the SLEEP button again to change the time.
Each time the button is pressed, the time changes in the following order (Change
from the last setting time):
Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.
Confirmation of TIMER's time
The left time of the TIMER which is being set currently will be displayed for 5 sec-
onds.
9312556014-En.pm6.5 2003.6.11, 5:08 PM9
To Next Page
Loading...
Need help?
General
