En-24
ANION GENERATOR MAINTENANCE
● Perform anion generator maintenance every 6 months.
● If anion generator produces hissing, buzzing, or crack-
ling sounds, perform maintenance even if 6 months has
not passed since the last maintenance.
Anion generator
(located deep in the air outlet)
Preparation ● Stop the air conditioner using the remote control unit.
● Unplug the power supply cord from the electrical outlet.
● The anion generator is located deep inside the air outlet of the indoor unit. Be sure to stop the air conditioner opera-
tion and wait for the internal fan to stop completely before beginning the maintenance.
● Do not touch any metal part of the anion generator. Electric shock may result.
1. Manually open the lower up/down air-
flow-direction louver and power diffuser
completely.
● The anion generator is installed deep inside the anion generator
cover in the air outlet.
Up/down airflow-direction
louver (lower)
Power diffuser
Anion generator cover
2. Remove the dust from the anion genera-
tor cover.
● Gently remove the dust from the anion generator cover. Use a
toothbrush, etc., and wipe the cover 3–4 times from the top to
the bottom.
● Do not use a cotton swab or anything with a nap such as a
cloth.
3. Manually close the lower up/down
airflow-direction louver and power
diffuser.
● After performing anion generator maintenance, the lower
up/down airflow-direction louver and power diffuser may
not close completely. If this occurs, plug the power sup-
ply cord into the electrical outlet and the lower up/down
airflow-direction louver and power diffuser will return to
their original positions.
9312556014-En.pm6.5 2003.6.11, 5:08 PM24
To Next Page
Loading...
Need help?
General
