Fujitsu ARTG30LHTDP

En-25
2
Select [On] or [Off] with the [Cursor button (Up/Down)],
and press the [Enter button].
Screen
Display
Filter sign reset
Filter sign
Initial
On
Mo 10:00
Cancel:
OK:
Whenyousetthissettingto[On],andairltercleaningonthe
indoor unit is required, the icon is displayed on the “Monitor”
screen.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Cool
Monitor
High
°
C
26
Menu
Filter sign
Mo 10:00
End:
5-5. R.C. sensor control setting
NOTE
• Thisfunctioncanbeusedonlyifthesettingisactivatedin
the installation. To activate this function, consult authorized
service personnel.
1
In “Submenu” screen, select [R.C. sensor control] with
the [Cursor button (Up/Down)], and press the [Enter but-
ton].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
Setting:
Back:
Submenu
[
1/2
]
2
Select [On] or [Off] with the [Cursor button (Up/Down)],
and press the [Enter button].
Screen
Filter sign
R.C. sensor control
Room temp. display
Date and time
On
Off
Monitor
Mo 10:00
OK:
Cancel:
Submenu
[
1/2
]
When you set this setting to [On], the icon is displayed on the
“Monitor” screen.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Cool
Monitor
High
°
C
26
Menu
R.C. sensor control
Mo 10:00
End:
11
5-6. Room temp. display setting
1
In “Submenu” screen, select [Room temp. display] with
the [Cursor button (Up/Down)], and press the [Enter
button].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
Setting:
Back:
Submenu
[
1/2
]
2
Select [On] or [Off] with the [Cursor button (Up/Down)],
and press the [Enter button].
Screen
Filter sign
R.C. sensor control
Room temp. display
Date and time
On
Off
Cancel:
Monitor
Mo 10:00
OK:
Submenu
[
1/2
]
When you set this setting to [On], the room temperature is
displayed on the screen.
Mode
Menu
Cool
Monitor
Room 28˚
C
Set temp.
Fan
High
°
C
26
Mo 10:00
NOTE
• Displayed room temperature is the approximate temperature
detected around this remote controller, and it could be
different from the actual room temperature. It also be
inuencedbytheinstallationenvironmentoftheremote
controller.
9381067145_OM_EN.indd 25 14/09/2015 13:48:06