Fujitsu ARXG45KHTA - Page 107

¢ Cool air prevention control (heating mode)
The maximum value of the indoor fan speed is set as shown below, based on the detected tempera-
ture by the indoor heat exchanger sensor on heating mode.
• Normal operation
Indoor heat exchanger
temperature rises
27°C
Stop
Setting fan mode
13 minutes later:
Indoor heat exchanger
temperature rises
27°C
LOW
Setting fan mode
• 10 °C HEAT operation
Indoor heat exchanger
temperature rises
27°C
LOW
AUTO
3-1. Indoor fan control - (04-9) - 3. Fan control
CONTROL AND FUNCTIONS CONTROL AND FUNCTIONS