Fujitsu AU*54LUAS - Page 159

10-42
9. TURBO FAN removal
Remove the M8 NUT and Washer(TURBO FAN).
Remove the TURBO FAN ASSY.
M8 NUT
Washer(TURBO FAN)
TURBO FAN ASSY
M8 NUT
Washer(TURBO FAN)
TURBO FAN ASSY
The M8 special NUT should
be tightened with a torque of
1.96 - 7.84 N m.
The M8 special NUT should
be tightened with a torque of
1.96 - 7.84 N m.
For AU*24LUAR
For AU*30/ 36/ 45/ 54LUAS