¢ Air conditioner registration pairing method
Choose the following modes to connect the air conditioner to the wireless LAN router.
NOTES:
• Before starting this setting, wait for 60 seconds or more after the power supply is connected to
the air conditioner (via breaker or plug).
• Check that the smartphone or tablet PC is linked to the wireless router to be connected to the
air conditioner.
The setting does not work if the same wireless LAN router is not connected.
• The displayed screen design may differ depending on the version of the mobile app.
• To control 2 or more air conditioners with the same smartphone or tablet PC, repeat the setup of
the chosen mode.
Light pattern:
 Button mode
1. Launch the mobile app.
2. Sign in with your e-mail address and password following the screen on the mobile app.
john@fgl.co m
ÛÛ ÛÛÛ Û
Sign in
3. Press the + button to add a new air conditioner.
4. Confirm that the LED 2 blinks (on/off at 2 seconds intervals). Then select Button mode on the
screen. If the LED 1 and 2 are off, push the setting button once.
Bu tto n m ode
Ma nua l m ode
on/off: 2 sec/2 sec
5. Press the WPS button on the wireless LAN router to be connected.
For the button location of the wireless LAN router and how to press it, refer to the operation
manual of the wireless LAN router.
4-6. Mobile app setting method
- (03-79) - 4. Troubleshooting with error code (For wireless LAN adapter)
TROUBLESHOOTING
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
