Need help?Do you have a question about the Fujitsu AUXG24KVLA and is the answer not in the manual?
General| Brand | Fujitsu |
|---|---|
| Model | AUXG24KVLA |
| Category | Air Conditioner |
| Language | English |
Detailed specifications for compact cassette type indoor units.
Detailed specifications for slim duct type indoor units.
Detailed specifications for duct type indoor units.
Electrical diagrams for compact cassette and slim duct indoor units.
Electrical diagrams for duct type indoor units.
Electrical requirements including voltage, frequency, MCA, and cable size.
Details on PCB fuses and fan motor thermal protectors.
Detailed specifications for outdoor units AOYG36KRTA, AOYG45KRTA, AOYG54KRTA.
Space requirements for single outdoor unit installation.
Space requirements for multiple outdoor unit installations.
Guidelines for installing outdoor units in multiple rows.
Diagram illustrating the refrigerant flow within the system.
Electrical wiring diagrams for outdoor units AOYG36KRTA and AOYG45KRTA/AOYG54KRTA.
Compensation rates for pipe length and height difference for AOYG36KRTA.
Calculation methods for additional refrigerant charge for AOYG36KRTA.
Calculation methods for additional refrigerant charge for AOYG45KRTA/AOYG54KRTA.
Safety devices and protection forms for outdoor units.
General precautions for indoor unit installation.
General precautions for outdoor unit installation.
Important items and materials for refrigerant piping design.
Guidelines on allowable height difference and piping length.
Guidelines for selecting appropriate heat insulating material for refrigerant pipes.
CAUTION and procedure for calculating additional refrigerant charge.
Steps for adding refrigerant and tightening torque specifications.
Formula and example for calculating additional charge for twin systems.
Formula and example for calculating additional charge for triple systems.
CAUTION and precautions for refrigerant piping installation.
Precautions for connecting pipes and bending pipes.
Steps for connecting pipes, including tightening torque.
Precautions for electrical wiring.
Power supply cable specifications for indoor and outdoor units.
Settings for indoor units, including primary/secondary and addresses.
Procedures for installing the wired remote controller main unit.
Overview of function settings for the outdoor unit.
Procedure for setting the Low Noise Mode on the outdoor unit.
Procedure for setting the Peak Cut Mode on the outdoor unit.
Procedure for setting functions using a wireless remote controller.
How to set custom codes for wireless remote controllers.
Procedure for setting functions using a wired remote controller.
Step-by-step guide for setting functions via wired remote.
Setting custom codes for remote controllers (wireless only).
Pre-test run check items and test operation method.
Items to check during and after test operation.
Error display mode and error code check table.
Procedure for pump down operation before refrigerant removal.
Precautions for installing the auto louver grille kit.
To Next Page
