S
stevecainSep 4, 2025
How to resume scanning on my Fujitsu fi-7800 after it's been paused?
- SShannon DaySep 5, 2025
If scanning on your Fujitsu Scanner has been paused, press the [Scan/Pause] button on the scanner's operator panel to resume.
To Next PageTo Next PageHow to resume scanning on my Fujitsu fi-7800 after it's been paused?
If scanning on your Fujitsu Scanner has been paused, press the [Scan/Pause] button on the scanner's operator panel to resume.
What to do if my Fujitsu fi-7800 has a paper jam due to paper protection?
If your Fujitsu Scanner experiences a paper jam related to the paper protection feature, consider the following: * Check if your document meets the size and type requirements for scanning. * If jams persist even with compliant documents, you might disable the paper protection function. * Remove any documents from the ADF. * Also, check the scanner for any remaining documents.
What to do if my Fujitsu fi-7800 has a paper jam in the ADF?
If your Fujitsu Scanner is experiencing a paper jam in the ADF, here's what you should do: * First, check that your document meets the requirements for scanning. * Next, remove any documents that remain in the ADF. * After that, check the scanner for any remaining documents. * It may also help to clean the rollers and sensors.
How to resolve a pick roller error on my Fujitsu fi-7800?
To resolve a pick roller error on your Fujitsu Scanner: * Pull down the Pick Roller Unit to its correct position. * Remove excess documents from the hopper. * Lower the height of the hopper. * Clean the rollers and sensors.
How to fix brake roller/separator roller issues on a Fujitsu Scanner?
If you suspect the brake roller or separator roller(s) are not installed correctly on your Fujitsu Scanner: * Check if the brake roller is installed correctly. * Check if the separator roller is installed correctly. * If problems persist, turn the scanner off and then back on.
What to do if the operator panel on my Fujitsu fi-7800 isn't working?
If you're experiencing an error with the operator panel on your Fujitsu Scanner, try turning the scanner off and then back on.
How to troubleshoot an optical error on a Fujitsu Scanner?
If your Fujitsu Scanner is displaying an optical error, try turning the scanner off and then back on.
How to resolve a flash error on a Fujitsu fi-7800?
If your Fujitsu Scanner displays a flash error, try turning it off and then back on.
What to do if my Fujitsu fi-7800 scans fewer sheets than configured?
If your Fujitsu Scanner scans fewer sheets than configured, load the remaining sheets onto the hopper and click the [Retry] button to continue scanning.
How do I exit Doc Counting mode on my Fujitsu fi-7800 Scanner?
If your Fujitsu Scanner is in Doc Counting mode, you can exit by either: * Pressing the [Stop] button on the scanner's operator panel, or * Pressing the [Function/Enter] button to switch to Doc Count Check Mode and start scanning again.
General| Scanner Type | Document Scanner |
|---|---|
| Optical Resolution | 600 dpi |
| ADF Capacity | 100 sheets |
| Light Source | LED |
| Scanning Speed (Duplex) | 160 ipm |
| Paper Size | A4 |
| Interface | USB 3.0 |
| Supported OS | Windows, macOS |
| Scanning Method | Simplex / Duplex |
