To Next Page
D
Denise MosesSep 18, 2025
What to do if there is a lamp circuit error on my Fujitsu fi-7800?
- PPamela CookSep 18, 2025
If your Fujitsu Scanner displays a lamp circuit error, try turning the scanner off and then back on.
What to do if there is a lamp circuit error on my Fujitsu fi-7800?
If your Fujitsu Scanner displays a lamp circuit error, try turning the scanner off and then back on.
What to do if my Fujitsu fi-7800 has a paper jam due to paper protection?
If your Fujitsu Scanner experiences a paper jam related to the paper protection feature, consider the following: * Check if your document meets the size and type requirements for scanning. * If jams persist even with compliant documents, you might disable the paper protection function. * Remove any documents from the ADF. * Also, check the scanner for any remaining documents.
What to do if my Fujitsu fi-7800 has a paper jam in the ADF?
If your Fujitsu Scanner is experiencing a paper jam in the ADF, here's what you should do: * First, check that your document meets the requirements for scanning. * Next, remove any documents that remain in the ADF. * After that, check the scanner for any remaining documents. * It may also help to clean the rollers and sensors.
How to resolve a pick roller error on my Fujitsu fi-7800?
To resolve a pick roller error on your Fujitsu Scanner: * Pull down the Pick Roller Unit to its correct position. * Remove excess documents from the hopper. * Lower the height of the hopper. * Clean the rollers and sensors.
How to fix a CCD24V error on a Fujitsu Scanner?
If your Fujitsu Scanner is showing a CCD24V error, try turning the scanner off and then back on.
What to do if my Fujitsu Scanner displays a sensor error?
If your Fujitsu Scanner is showing a sensor error, try turning the scanner off and then back on.
How to troubleshoot an optical error on a Fujitsu Scanner?
If your Fujitsu Scanner is displaying an optical error, try turning the scanner off and then back on.
How to resolve a flash error on a Fujitsu fi-7800?
If your Fujitsu Scanner displays a flash error, try turning it off and then back on.
What to do if my Fujitsu fi-7800 scans fewer sheets than configured?
If your Fujitsu Scanner scans fewer sheets than configured, load the remaining sheets onto the hopper and click the [Retry] button to continue scanning.
How do I exit Doc Counting mode on my Fujitsu fi-7800 Scanner?
If your Fujitsu Scanner is in Doc Counting mode, you can exit by either: * Pressing the [Stop] button on the scanner's operator panel, or * Pressing the [Function/Enter] button to switch to Doc Count Check Mode and start scanning again.
General| Scanner Type | Document Scanner |
|---|---|
| Optical Resolution | 600 dpi |
| ADF Capacity | 100 sheets |
| Light Source | LED |
| Scanning Speed (Duplex) | 160 ipm |
| Paper Size | A4 |
| Interface | USB 3.0 |
| Supported OS | Windows, macOS |
| Scanning Method | Simplex / Duplex |
Provides an overview of the scanner's features, models, and specifications.
Highlights important safety precautions and refers to the Safety Precautions manual.
Details the names and functions of the scanner's various parts.
Provides step-by-step instructions for powering the scanner on and off.
Explains how to open and close the document hopper.
Details the procedure for opening and closing the Automatic Document Feeder (ADF).
Provides instructions on how to open and close the scanner's top cover.
Explains how to adjust paper separation force to prevent feeding errors.
Details the names and functions of each button and component on the operator panel.
Guides users on navigating and using the scanner's main menu options.
Details the process of manual feeding, including single and continuous modes.
Explains how to configure scanner buttons to initiate scanning operations.
Lists recommended cleaning materials and their part numbers.
Provides instructions for cleaning the ADF using a cleaning sheet.
Step-by-step guide on how to replace the scanner's pick rollers.
Instructions for replacing the scanner's separator roller.
Details the procedure for replacing the scanner's brake roller.
Provides steps for safely removing jammed documents from the scanner.
Lists scanner error codes, their descriptions, and corresponding solutions.
Troubleshooting steps for when the scanner fails to power on.
Guides users on how to resolve issues when scanning operations do not begin.
Provides solutions for frequent paper jams and pick errors.
Lists items to check before contacting support for unresolved issues.
Explains how to launch and access the Software Operation Panel for configuration.
