If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List or the Contact for Inquiries section in Safety
Precautions bundled with this product and make an inquiry.
Optical Error
When an optical error occurs, one of the following error codes appears on the LCD of the scanner's operator
panel.
E2:74 Optical error (ADF Front)
E3:75 Optical error (ADF Back)
Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List or the Contact for Inquiries section in Safety
Precautions bundled with this product and make an inquiry.
Flash Error
When a flash error occurs, the following error code appears on the LCD of the scanner's operator panel.
E5:EB Flash Error
Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List or the Contact for Inquiries section in Safety
Precautions bundled with this product and make an inquiry.
Operator Panel Error
When an operator panel error occurs, the following error code appears on the LCD of the scanner's operator
panel.
E6:D3 Operator Panel error
Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List or the Contact for Inquiries section in Safety
Precautions bundled with this product and make an inquiry.
EEPROM Error
When an EEPROM error occurs, the following error code appears on the LCD of the scanner's operator panel.
E7:D2 EEPROM Error
Turn the scanner off then back on.
Troubleshooting
162
To Next Page
Loading...
