Resetting the Password
If you forgot your password, reset it.
1 Right-click the Software Operation Panel icon on the taskbar, and select [Password Setting] from the
menu.
The [Password setting] window appears.
2 Enter the default password which is "fi-scanner", and click the [OK] button.
The [Password setting] window appears.
3 Enter a new password then again to confirm, and click the [OK] button.
Up to 32 characters can be used for the password.
Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are allowed.
A message window appears.
4 Click the [OK] button.
Operational Settings
203
To Next Page
Loading...
